Calibration, Suggested uses, Specifications – PASCO PS-2146 Absolute Pressure_Temperature Sensor User Manual

Page 3

Advertising
background image

®

A b s o l u t e P r e s s u r e / T e m p e r a t u r e S e n s o r

P S - 2 1 4 6

012-08708B

3

Calibration

The absolute pressure for this sensor is factory calibrated and for temperature, calibration is usually not nec-
essary. However, a one-point or two-point calibration for temperature can be performed. To do so, you must
have an accurate, independent means of measuring temperature, such as a thermometer. For instructions,
refer to the documentation for your data acquisition software or data logger.

Suggested Uses

•

Study gas laws, such as Charles’ Law, Boyle’s Law, and the Ideal Gas Law.

•

Extrapolate pressure and temperature to determine absolute zero.

•

Explore pressure and temperature relationships.

Other PASCO Equipment for use with the Absolute Pressure/Temperature Sensor

•

*NOTE: The Absolute Pressure/Temperature Sensor was designed for use with any thermistor-based
PASCO Temperature probe that has a 3.5 mm (0.125 inch) mini stereo plug.

Specifications

*The temperature range depends on the temperature probe used. These specifications are for the Fast Response Temperature Probe.

Item

Part Number

Skin/Surface Temperature Probe*

PS-2131

Stainless Steel Temperature Probe*

PS-2153

Heat Engine/Gas Law Apparatus

TD-8572

Small Piston Heat Engine

TD-8592

Item

Temperature*

Range

0 to 700 kPa

-10 °C to 70 °C

Accuracy

±2 kPa

±0.5 °C

Resolution

0.1 kPa

0.0025 °C

Repeatability

1 kPa

0.01 °C

Units

kPa, N/m

2

, psi, atm, torr

°C, °K, °F

Advertising