PASCO PS-2154A Weather Sensor User Manual

Weather sensor, Quick start, Introduction

Advertising
background image

I n s t r u c t i o n S h e e t

0 12 - 1 02 28 B

Weather Sensor

PS-2154A

Quick Start

1.

Connect the Weather Sensor to your PASPORT-compatible
interface.

2.

If you are using a computer, connect the interface to it and
start the PASCO data acquisition software.

3.

Touch or click “Record” or “Start” to begin recording data.

Introduction

The Weather Sensor measures

•

barometric pressure (in inches of Hg, hPa, or mbar),

•

absolute humidity (g/m

3

),

•

and air temperature (°C, °F, or K).

From these measurements, the sensor calculates

•

relative altitude,

•

relative humidity, and

•

dew point.

All of these measurements are recorded by your PASPORT inter-
face and the PASCO software. By default, data is recorded at the
rate of 1 sample/s. The maximum rate is 5 samples/s.

For Best Results

•

Keep the sensor out of direct sunlight when making mea-
surements.

•

If you intend to leave the sensor outdoors, place it at least
1 m above the ground and be sure that it will remain shaded
and dry.

•

If the sensor will be in a still environment, such as a terrar-
ium, use a small fan to maintain air flow through the sensor.

Important: Do not immerse the sensor in liquid or allow it to get wet.

Suggested Uses

•

Compare pressure, humidity, temperature, and dew point as
they change over time.

•

Compare pressure, humidity and temperature at various
locations.

•

Monitor weather conditions.

•

Monitor greenhouse conditions.

PS-2154A

ä

SENSOR

WEA

THER

Included Equipment

Part Number

Weather Sensor

PS-2154A

Additional Equipment Required

PASCO Interface and Data

Acquisition Software

See www.pasco.com

or PASCO catalog

Recommended

Part Number

PASPORT Sensor Extension

Cable

PS-2500

Advertising