PASCO PS-2135 Fast Response Temperature Probe - Manual

Instruction Sheet
for the PASCO
Models PS- 2135
Fast Response Temperature Probe
012-08475E
Introduction
The Fast Response Temperature Probe (PS-2135)
measures temperature in degrees Celsius (-30 °C
to +105 °C) and plugs into any PASPORT™
Temperature Sensor, or ScienceWorkshop®
Thermistor Sensor. The Fast Response
Temperature probe has applications for studying
temperature gradients, evaporative cooling,
outdoor air temperature, and environmental
studies.
The probe can be placed on the surface of an
object, on skin, in water, or even in mild chemical
solutions. It has a 1-meter flexible wire, making it
convenient for taking measurements in long
flasks, between objects, or below the surface of a
liquid. The adhesive mylar foam covers are
designed to hold the probe tip and adhere it to a
participant’s skin or to other flat surfaces. The
mylar reduces environmental influences.
Available Replacement Equipment
stereo plug
flexible wire
probe
tip
sample
data
Inserted probe in
water.
water
temperature
probe
in air
(53°C)
• Adhesive Mylar Covers 10 Pack (PS-2525)
Additional Equipment Required
• PASPORT Temperature Sensor (PS-2125),
ScienceWorkshop Thermistor Sensor (CI-6527A)
• PASPORT interface and DataStudio (version 1.7
or later)
OR
ScienceWorkshop interface and DataStudio
(version 1.8.5 or later)