Copyright, warranty, and equipment return, Warning – PASCO CI-6556 CURRENT SENSOR User Manual
Page 4
Equipment Return
Should the product have to be returned to PASCO
scientific for any reason, notify PASCO scientific by
letter, phone, or fax BEFORE returning the product.
Upon notification, the return authorization and shipping
instructions will be promptly issued.
➤
➤
➤
➤
➤ NOTE:
NO EQUIPMENT WILL BE
ACCEPTED FOR RETURN WITHOUT AN
AUTHORIZATION FROM PASCO.
When returning equipment for repair, the units must be
packed properly. Carriers will not accept responsibility
for damage caused by improper packing. To be certain
the unit will not be damaged in shipment, observe the
following rules:
➀
The packing carton must be strong enough for the
item shipped.
➁
Make certain there are at least two inches of packing
material between any point on the apparatus and the
inside walls of the carton.
➂
Make certain that the packing material can not shift in
the box, or become compressed, allowing the
instrument come in contact with the packing carton.
Address:
PASCO scientific
10101 Foothills Blvd.
P.O. Box 619011
Roseville, CA 95678-9011
Phone:
(916) 786-3800
FAX:
(916) 786-8905
email:
Copyright Notice
The PASCO scientific 012-06431B instruction sheet is
copyrighted and all rights reserved. However, permission
is granted to non-profit educational institutions for
reproduction of any part of the Current Sensor instruction
sheet providing the reproductions are used only for their
laboratories and are not sold for profit. Reproduction
under any other circumstances, without the written
consent of PASCO scientific, is prohibited.
Limited Warranty
PASCO scientific warrants the product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman-
ship. The warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return ship-
ment will not be covered by the warranty.) Shipping costs
for returning the equipment after repair will be paid by
PASCO scientific.
Copyright, Warranty, and Equipment Return
Please—Feel free to duplicate this manual
subject to the copyright restrictions below.
Warning
Application of electrical voltage and/or
currents in excess of the values listed in the
product specification section will damage this
product, create a safety hazard, and may
endanger the operator. This device does not
use or produce voltages that exceed 42.4 VAC
peak, 30 VAC RMS, or 60 VDC.
Credits
Author:
Steve Miller
Editor:
Sunny Bishop