PASCO PS-2124A Humidity_Temperature_Dew Point Sensor User Manual

Humidity/temperature/dew point sensor, Quick start, Introduction

Advertising
background image

®

I n s tr u c t i o n S he e t

0 1 2 - 1 0 2 2 3 A

Humidity/Temperature/Dew Point Sensor

PS-2124A

Quick Start

1.

Connect the Humidity/Temperature/Dew Point Sensor to
your PASPORT interface.

2.

If you are using a computer, connect the interface to it and
start DataStudio.

3.

Press or click the start button to begin recording data.

Introduction

The Humidity/Temperature/Dew Point Sensor measures absolute
humidity (in units of g/m

3

) and air temperature (in °C, °F, or K).

From these measurements, it calculates relative humidity and
dew point.

All of these measurements are recorded by your PASPORT inter-
face or DataStudio software. By default, data is recorded at the
rate of 2 samples/s. The maximum rate is 10 samples/s.

For Best Results

•

Keep the sensor out of direct sunlight when making mea-
surements.

•

If you intend to leave the sensor outdoors, place it at least
1 m above the ground and be sure that it will remain shaded
and dry.

•

If the sensor will be in a still environment, such as a terrar-
ium, use a small fan to maintain air flow through the sensor.

Important: Do not immerse the sensor in liquid or allow it to get wet.

Suggested Uses

•

Compare humidity, temperature, and dew point as they
change over time.

•

Compare humidity and temperature at various locations.

•

Monitor weather conditions.

•

Monitor greenhouse conditions.

PS-2124A

ä

SE

NS

OR

HUMIDITY/TEMP/

DEW POINT

Included Equipment

Part Number

Humidity/Temperature/Dew Point

Sensor

PS-2124A

Additional Equipment Required

PASPORT Interface

See www.pasco.com

or PASCO catalog

Advertising