PASCO PS-2100A USB Link - Manual

800-772-8700 [email protected]
+1 916 786 3800 www.pasco.com
I n s t r u c t i o n S h e e t
0 1 2 - 0 9 9 8 9 B
USB Link
PS-2100A
*See the PASCO catalog or the PASCO web site at www.pasco.com for more information.
Quick Start
• Plug the USB Plug into a USB port on a computer
or into a port on a USB hub connected to a com-
puter. (Look for the USB icon.)
• Connect a PASPORT sensor to the mini-DIN port
on the other end of the USB Link. Note that a
PASPORT sensor will connect to the USB Link in
only one way. Match the groove on one side of the
sensor or sensor plug with the alignment tab on the
bottom lip of the USB Link
• If you have an analog sensor with a five pin or
eight pin DIN plug, or a digital sensor with a phone
plug, connect the sensor to a PASPORT Analog Adapter (PS-2158) or a PASPORT Digital Adapter
(PS-2159), and then connect the adapter to the USB Link.
Included Equipment Part Number
USB Link PS-2100A
Recommended Items Part Number
PASCO PASPORT Compatible Interface* see www.pasco.com
PASCO Data Acquisition Software* see www.pasco.com
Optional Items Part Number
PASPORT Sensor Extension Cable PS-2500
PASPORT Analog Adapter or Digital Adapter PS-2158 or PS-2159
Light Emitting Diode (LED)
connection indicator
USB Plug
Alignment
tab
Nine pin mini-DIN Port USB icon
OR
PASPORT
Sensor plug
PASPORT Sensor
USB Link