PASCO ME-8750 HARMONIC OSCILLATOR_DRIVER User Manual

Harmonic oscillator/driver, Instruction sheet for the pasco model me-8750

Advertising
background image

Instruction Sheet
for the PASCO
Model ME-8750

HARMONIC OSCILLATOR/DRIVER

012-05931A

1/96

$1.00

better

teach science

ways to

Phone (916) 786-3800 • FAX (916) 786-8905 • email: [email protected]

10101 Foothills Blvd. • P.O. Box 619011 • Roseville, CA 95678-9011 USA

®

© 1996 PASCO scientific
This instruction sheet written/edited by: Ann & Jon Hanks

Introduction

The PASCO ME-8750 Harmonic Oscillator/Driver is de-
signed to drive apparatus requiring a low frequency (0.3
to 3 Hz), high torque, sinusoidal oscillation. It consists of
a DC motor with an offset driving arm and a mounting
bracket. A string can be attached between the driving
arm and the apparatus which is to be driven. The Oscilla-
tor/Driver will provide a sinusoidal pull on the string. If
one desires to both push and pull on an apparatus, the
PASCO Push/Pull Accessory (ME-8751) may be added
to the Oscillator/Driver.

Features

12 VDC motor (frequency: 0.3-3 Hz, current: 0-
0.3 A)

Adjustable Amplitude: adjustable up to 12 cm.

Photogate Attachment: A photogate can be at-
tached to measure the frequency of the oscillator.

Driver mounts on Dynamics Track or Rod Stand

Rubber washers on mounting bracket provide qui-
eter operation on the dynamics track.

Optional Push/Pull Accessory (ME-8751):
Mounts to oscillator, replacing the string and al-
lowing the apparatus to be pushed as well as
pulled.

Operation of the Oscillator/Driver

Mounting: The Oscillator/Driver can be mounted to a
dynamics track to drive dynamics carts or it can be
mounted on a rod stand for driving other apparatus.
See Figures 1 and 2. Tie one end of a string to the
white plastic piece on the driving arm and thread the
other end of the string through the hole in the guide.
The level of the guide can be adjusted by about 5.5 cm
to match the height of the object to be driven.

Figure 1: Oscillator/Driver Mounted on a Rod Stand

Figure 2: Oscillator/Driver Mounted on Dynamics Track

Power Source

Connectors

Harmonic

Oscillator/Driver

Rod Stand

Equipment

Offset

Driving Arm

Mounting Bracket

DC Motor

Photogate

String Guide

Harmonic

Oscillator/Driver

Power Source

Connectors

Dynamics

Track

String

String holder

Advertising