Technical support – PASCO CI-6759A USB_Serial Converter User Manual

Page 2

Advertising
background image

®

U S B / S e r i a l C o n v e r t e r

C I- 6 7 5 9 A

2

To Use with a 750 Interface

Set-up

1.

Turn on the 750 Interface

2.

Connect the serial plug of the converter to the serial connec-
tion on the back of the interface. (See fig. 3)

3.

Connect the USB plug to the USB port on the computer or
USB hub. (See fig. 2)

4.

Open DataStudio (version 1.9.8 or later).

Benefits

When using the serial port on the interface, the maximum
sustained sample rate increases from 500 Hz to 4000 Hz.
The maximum sustained sample rate when using the 750
interface with a SCSI port is approximately 10000 Hz. Burst
mode will still provide a 250000 Hz sample rate.

Using the serial port on the interface, the maximum frame
rate when using an oscilloscope display increases from about
2 frames/sec to 11 frames/sec. Frame rates will vary depend-
ing on the computer processor speed, available RAM, and
time base selected. The maximum frame rate when using the
750 Interface with a SCSI port is approximately 64
frames/sec.

Technical Support

For assistance with any PASCO product, contact PASCO at:

Limited Warranty

For a description of the product warranty, see the

PASCO catalog.
Copyright

The PASCO scientific 012-08185B

USB/Serial Converter

Instruction Sheet is copyrighted with all rights reserved. Permission is
granted to non-profit educational institutions for reproduction of any part of
this manual, providing the reproductions are used only in their laboratories
and classrooms, and are not sold for profit. Reproduction under any other
circumstances, without the written consent of PASCO scientific, is prohib-
ited.
Trademarks

PASCO, PASCO scientific, DataStudio, PASPORT, and

Xplorer GLX are trademarks or registered trademarks of PASCO scientific,
in the United States and/or in other countries. All other brands, products,
or service names are or may be trademarks or service marks of, and are
used to identify, products or services of, their respective owners. For more
information visit www.pasco.com/legal.

fig.3

Address: PASCO scientific

10101 Foothills Blvd.
Roseville, CA 95747-7100

Phone:

916-786-3800 (worldwide)
800-772-8700 (U.S.)

Fax:

(916) 786-7565

Web:

www.pasco.com

Email:

[email protected]

Advertising