PASCO ME-8961 ADDITIONAL GYROSCOPE DISK User Manual

Additional gyroscope disk, Instruction sheet for the pasco model me-8961, Assembly

Advertising
background image

Instruction Sheet
for the PASCO
Model ME-8961

ADDITIONAL GYROSCOPE DISK

012-05330B

4/94

$1.00

Phone (916) 786-3800 • FAX (916) 786-8905 • TWX 910-383-2040

10101 Foothills Blvd. • P.O. Box 619011 • Roseville, CA 95678-9011 USA

better

teach physics

ways to

© 1994 PASCO scientific
This instruction sheet written/edited by: Jon Hanks

ME-8960

DEMONSTRA

TION

GYROSCOPE

included 900g
counterweight

ME-8960

Demonstration

Gyroscope

rotating disk

900g

counterweight

add-on mass (part

of ME-8960)

Assembly

Using the Additional Gyroscope Disk

➀

Slide the included 900g counterweight onto
the long side of the gyroscope axle and tighten
the thumbscrew.

➁

Put the Additional Gyroscope Disk on the
other end of the gyroscope axle with the pul-
ley side of the disk facing away from the cen-
ter of the gyroscope apparatus. Secure the disk
in place with the supplied thumbscrew. See
Figure 1.

thumbscrew (part

of ME-8960)

additional gyroscope

disk

Figure 1: Using the Additional Gyroscope Disk

thumbscrew (part

of ME-8960)

Introduction

The PASCO ME-8961 Additional Gyroscope Disk is
designed to be used with the PASCO ME-8960
Demonstration Gyroscope. When used in addition to
the components included with the ME-8960 Demon-
stration Gyroscope, a greater variety of experiments
can be performed.

See the Demonstration Gyroscope manual for a
complete guide to experiments

Equipment

The ME-8961 Additional Gyroscope Disk includes
the following:

– 25cm diameter rotating disk with pulley

– one 900g large counterweight

– thumbscrew

Advertising