PASCO SF-9214 Precision 2.0 Meter Air Track - Manual (Page 12)

scientific 8
012-02149B
Recommended Equipment
Model SF-9216 Air Supply –
A variable speed air supply suitable to power one or
two Model SF-9214 Air Tracks.
Model SF-9217 T-Adaptor and Hose –
Permits operating two Air Tracks from one air supply.
Model SF-9224 Additional Glider Kit –
This kit includes one glider with two additional 50 g
masses, a bumper plate and a rubber band bumper.
ME-9239 Riser Block Kit –
This set of four aluminum riser blocks (.25 to 2 cm
thickness) tilt the Air Track to precise and repeatable
angles.
Model SF-9296 Electric Launcher –
This launcher, designed for use only with the PASCO
Air Track, launches the glider repeatedly with the same
impulse and velocity.
➦ Note: Requires a power supply. Refer to the
PASCO catalog.
SF-9297 Coupled Harmonic Oscillators –
The kit includes three gliders, six 50 g masses, springs
and connecting plugs, allowing experiments with up to
five gliders in coupled harmonic motion.
ME-9356 Force Transducer to Air Track Mounting
Kit –
Mounting the PASCO Force Transducer to the Air
Track enables measuring the impulse in an air track
collision.
ME-9206A Basic Photogate Timer –
A self-contained timer with resolution to 1.0 mS and
1% accuracy
ME-9215A Photogate Timer with Memory –
A self-contained timer with resolution to .1 mS, 1%
accuracy and a memory feature for taking collision
measurements.
ME-9204A Accessory Photogate –
Plugs into any PASCO Photogate Timer or Counter/
Timer for taking "pulse" or timing measurements over
longer distances.
PI-8025 Counter/Timer/Frequency Meter –
The capability of operating as two independent timers
with memory, provides a total of four measurements in
a single experiment.