Experiment 1 – PASCO SE-9076 Constant Velocity Tubes User Manual
Page 20

16
Constant Velocity Tubes
012–06697B
Experiment 1
➤
To preserve the discovery aspect of the lab, you will need to cover
the ends of the tubes with paper before the lab starts. A sheet of notebook
paper secured with rubber bands and masking tape works well. Scotch (or
cellophane) tape is very difficult to remove from the tubes.
7. Red or violet tube:
1 cm
Orange or blue tube:
9 cm
Yellow or green tube:
16 cm
8. The y-intercept is the position of the bubble at time = 0; more simply, it is the initial
position of the bubble.
9. The measurement should be approximately the same value as the value at the y-intercept.
10. The answers to 7 and 9 should be approximately the same.
11.
12. The result should be two parallel lines having the same slope but different y-intercepts.
The difference in y-intercepts is due to the different initial positions.
13. See graph above.
2
4
6
8
10
12
14
16
18
10
20
30
40
50
60
70
80
ELAPSED TIME (SECONDS)