PASCO SF-9584B Power Supply - Manual

This power supply has been designed specifically
for use in teaching physics, chemistry and other
science subjects. The power supply can provide
both direct current (DC) and alternating current (AC).
The power supply can provide both types of electri-
cal power at the same time, and they can be adjus-
ted independently of one another. Separate displays
are provided for DC and AC output.
Safety
The power supply is of the switched mode type, and
it adheres to the EN-61558-1 standard. The connec -
tion jacks are safety-type 4 mm banana plug con -
nec tors and are well-suited for use with students.
The connectors will also accept leads with ordinary
bana na plugs. The apparatus is CE marked and
approved.
A power cord with ground is provided with the ap-
paratus. The apparatus must be connected to a
power outlet with ground.
Under extreme conditions, which will rarely occur
under normal use (high temperature combined with
high loading for a long period of time), the power
supply will automatically shut down when a given
internal temperature is reached. The power supply
will turn itself on again, when it has cooled off.
Important !
Never connect two power supply outlets in paral-
lel. This applies whether the outlets belong to the
same apparatus or to separate units.
Operation
The power supply is connected to the power outlet
230 VAC, 50 Hz (115 V 50/60 Hz) using the power
cord which is provided.
The apparatus must be connected to a power outlet
with ground.
The control panel is divided into two sections:
The DC-controls are to the left, the AC-controls are
to the right. Each section operates independently of
the other.
The numbered items on the control panel (see illu-
stration) correspond to the following functions:
Manual for Power Supply 3630.00
06.06.12 Ae 3630.00
A/S Søren Frederiksen, Ølgod Tel. +45 7524 4966 [email protected]
Viaduktvej 35 · DK-6870 Ølgod Fax +45 7524 6282 www.frederiksen.eu
®
12 11 10 9 8 7 1
6 3 5 4 2