PASCO SE-8605 MAGNET HOLDERS User Manual
Magnet holders, Instruction sheet for the pasco model se-8605
Instruction Sheet
for the PASCO
Model SE-8605
MAGNET HOLDERS
012-03410B
2/2001
$1.00
© 1987 PASCO scientific
Introduction
The SE-8605 Magnet Holders have jeweled bearings
for long wear and minimal friction. The acrylic stands
are excellent insulators, so they work well for
electrostatic experiments as well as for magnetic
experiments. Use caution when handling the stands as
they may be easily damaged.
Equipment
INCLUDED
• magnet holders (2)
magnet holders
(2)
ADDITIONAL REQUIRED
• bar magnets
Magnet Holder Usage
Place objects on the stand carefully. Objects must be
centered as unbalanced loads can put an excessive
strain on the bearings.
Figure 1 illustrates suggested uses for the magnet
holders. The low friction bearings make them excellent
for investigating small forces.