PASCO EM-8642A INDUCTION EXPERIMENT SET - Manual

Instruction Sheet
for the PASCO
Model EM-8642A
INDUCTION EXPERIMENT SET
012-04758B
Introduction
The PASCO Model EM-8642A Induction Experiment Set
includes a set of three aluminum paddles, a swing and a
mounting bar which will enable you to perform demonstra-
tions of induction and magnetic damping and to demonstrate
the magnetic force on a current-carrying wire.
The PASCO Model EM-8642A Induction Experiment Set is
designed to be used with the PASCO Model EM-8641
Variable Gap Lab Magnet and suggested experiments can be
found in the experiment manual that is included with the
PASCO Model EM-8641 Variable Gap Lab Magnet.
Additional Equipment Required:
• Variable Gap Lab Magnet
• Lab Stand
Additional Equipment Recommended:
• Low Voltage Power Supply such as PASCO Model PI-
9593, SF-9582 or SF-9584A
or
• Mini-Generator, PASCO Model SE-8645
• Patch Cords, PASCO Model SE-9750 or SE-9751
Phone (916) 786-3800 • FAX (916) 786-8905 • web: www.pasco.com
10101 Foothills Blvd. • Roseville, CA 95678-9011 USA ®
better
teach science
ways to