PASCO OS-8528A DIODE LASER - Manual

RED
DIO
DE L
ASE
R
003 -10 496
AVO ID E XPO SUR E
LAS ER L IGH T IS EMIT TED
FRO M TH IS A PER TUR E
®
Instruction Sheet
for the PASCO
Model OS-8528A
DIODE LASER FOR
OPTICS SYSTEMS
012-11248A
Introduction
The OS-8528A Diode Laser for PASCO Optics
Systems is designed specifically as an inte-
grated alternate light source for the PASCO
OS-8500 Introductory Optics System.
Figure 1: OS-8528A Diode Laser Features
thumbscrew
“alignment
edge”
Additional equipment recommended:
– PASCO OS-8500 Introductory Optics System
Replacement parts:
Description PASCO part no.
thumbscrew assembly 617-008
Optics System mount 648-06146
➤
CAUTION - use of controls or adjustments
or performance of procedures other than those
specified herein may result in hazardous radia-
tion exposure.
• LASER LIGHT - DO NOT STARE INTO BEAM.
• CLASS 2 LASER PRODUCT
• This Laser Product is designated as Class 2
during all procedures of operation.
• Do not point the laser or allow the laser to be
directed or reflected toward people or animals.
Phone (916) 786-3800 • FAX (916) 786-8905 • web: www.pasco.com
10101 Foothills Blvd. • Roseville, CA 95678-9011 USA ®
better
teach science
ways to
RED DIODE LASER 003-10496
AVOID EXPOSURE
LASER LIGHT IS EMITTED FROM THIS APER
TURE
®
OS
-85
28A
DIODE LASER FOR
OPTICS SYSTEMS 10101 F
oothill Blvd.
Rose ville , CA 95747 U
SA
Man ufac ture d by:
®
Complies with FDA
performance st
andards for
laser product
s except for
deviations
pursuant
to Laser
Notice No. 50, dated June 24, 2007
LASER LIGHT DO NOT ST
ARE
INT
O BEAM
CLASS 2 LASER PRODUCT 650nm, <1mW CW (Red) CLASSIFIED 60825-1 2007
Complies with FDA
performance standards for
laser products except for
deviations pursuant to Laser
Notice No. 50, dated June 24, 2007
LASER LIGHT
DO NOT STARE
INTO BEAM
CLASS 2 LASER PRODUCT
650nm, <1mW CW (Red)
CLASSIFIED 60825-1 2007
Warning Label
The magnetic steel base of the Diode Laser incorpo-
rates an “alignment edge” that, when placed against
the alignment rail of your PASCO Optics System,
aligns the laser beam to the optical path of your existing
system’s components. The laser diode assembly can
also be rotated 360° adding flexibility to experiment
set up. See Figure 1.
Equipment
– Diode Laser for PASCO Optics Systems.
– 9VDC adapter
Specifications
Class: II Laser
Wavelength: 650 nm
Max. Output: <1mW