PASCO OS-8520 PHOTOMETER User Manual

Page 6

Advertising
background image

6

Photometer

012-05631A

Procedure

➤ NOTE: You may want to cover the crossed-arrow objects on each light source to reduce

the excess light in the room. The room lights must be off for this experiment.

➀

Set the neutral density filter for 100% transmission.

➁

While looking into the photometer’s conical eyepiece, adjust the position(s) of the light
source(s) until the two sides of the orange indicator have equal intensity.

➂

Set the neutral density filter for 75% transmission.

➃

While looking into the photometer’s conical eyepiece, rotate the label-side polarizer until the
two sides once again have equal intensity. Record the angle in Table 2.1. Rotate the polarizer
back to zero and repeat the measurement two more times.

➄

Repeat the previous step for 50% and 25% transmission.

Table 2.1: Data and Results

% transmittance

75%

50%

25%

trial 1

trial 2

trial 3

Average angle

φ

cos

2

φ

% difference

Analysis

➀

For each of the neutral density filter settings, calculate the average of the three trials and
record the average angle in Table 2.1.

➁

To calculate the predicted percentage transmittance for each case, calculate the square of the
cosine of each average angle and record in Table 2.1.

➂

Calculate the percent difference between the percentage transmittance and the predicted value
for each case and record in Table 2.1.

Advertising