Bosch TCC78K751 Edelstahl Kaffeevollautomat - Manual (Page 42)

40 | English
Bosch TCC78K751 | 11/2011
Deployment system
The appliance can be pulled out of the built-
in unit. To do this,
► press m (8) (appliance must be switched
on for this) or
► remove grate and pull on the handle
underneath which is now accessible:
The appliance now moves into deployment
position 1. In this position it can be i lled
with water, coffee beans, ground coffee and
cleaning/descaling tablets, and the acces-
sories on the right of the appliance can be
removed.
To pull the appliance out fully,
► press m (8) again and pull the appliance
out by hand into position 2 or
► pull the appliance out fully by the handle.
In deployment position 2 the brewing unit
can be removed and the grinding unit
adjusted.
Deployment Deployment
position 1 position 2
Then push the appliance back fully into the
built-in unit.
During the brewing process,
deployment is prevented.
Accessories
The fully automatic espresso machine has
special compartments for storing the acces-
sories and quick reference guide (23) with
the appliance. These are located on the right
side (15, 16) and are accessible when the
appliance is pulled out into deployment posi-
tion 1.
Operation
General
Fill the water tank with fresh, uncarbonated
water only, and preferably use only beans
for fully automatic coffee and espresso ma-
chines. Do not use coffee beans that have
been glazed, caramelised or treated with
other additives containing sugar, since they
will block the brewing unit.
If the appliance is being used for the i rst
time or has not been operated for a long pe-
riod, the i rst cup of coffee will not have the
full aroma.
When using the espresso machine for the
i rst time, you will achieve a suitably thick
and stable “crema” only after the i rst few
cups have been dispensed.
The factory settings of the fully automatic es-
presso machine are programmed for optimal
performance. The appliance switches off au-
tomatically after one hour. This setting, like
many others, can be changed (see Auto off
after under “Displaying settings”).
Important: Only use the appliance
in frost-free rooms. If the appliance
has been transported or stored at
temperatures below 0 °C, wait at
least 3 hours before operation.
TCC78K751_Heft1.indb 40 15.11.2011 10:15:13