Bosch TCC78K751 Edelstahl Kaffeevollautomat - Manual (Page 43)

English | 41
Bosch TCC78K751 | 11/2011
Setting up the appliance
1. Deploy the appliance (see “Deployment
system”).
2. Remove the water tank (14) by pulling
it upward, rinse and i ll it with fresh cold
water. Do not i ll above the “max” mark.
14
17
3. Replace the water tank and push it i rmly
downward into place.
Fill the water tank with fresh water
every day. The tank should always
contain sufi cient water for operat-
ing the appliance.
4. Fill the bean container (17) with coffee
beans (for preparation using pre-ground
coffee, see page 44).
5. Push the appliance back into the built-in
unit.
6. Press the power switch (2).
2
7. The appliance now heats up and rinses.
Some water will run out of the coffee
outlet. The language selection is shown
in the display:
Sprache
(
Deutsch
)
}
8. Press the retracted rotary knob (5) and
turn it to select the language in which
you want the display texts to appear. The
following languages can be selected:
Deutsch Português
English Dansk
Pycckий Norsk
Nederlands Suomi
Français Česky
Italiano Türkçe
Svenska Magyar
Español Ελληνικά
Polski Български
9. Press o start/stop (10). The language
you selected is saved.
You can change the language setting at
any time (see “Displaying settings”).
10. The company logo and various symbols
will i rst light up in the display, followed
by the drinks selection menu.
Coffee
I
w
}
11. Set the water hardness
(see “Displaying settings”).
TCC78K751_Heft1.indb 41 15.11.2011 10:15:14