Cleaning the milk system – Bosch TCC78K751 Edelstahl Kaffeevollautomat User Manual

Page 54

Advertising
background image

52 | English

Bosch

TCC78K751 | 11/2011

7. Wipe out the inside of the tray holders.

8. Clean the milk frother (procedure de-

scribed below).

9. Replace all the parts again.

Important: Drip tray for coffee

outlet (27) and coffee grounds

container (28) should be emptied

and cleaned daily to prevent mould

from developing.

If the appliance is switched off us-

ing the button (3)

Z

(rinsing and

switching off) or it switches off in

accordance with the “Auto off after”

settings, the rinsing process will

automatically take place. In other

words the pipework inside the ap-

pliance is cleaned by the machine

itself.

Important: If the appliance has not

been used for a prolonged period

of time (e.g. after a vacation), clean

the entire appliance thoroughly, in-

cluding the milk system and brew-

ing unit.

Cleaning the milk system

Risk of burns! The milk frother

(12) gets very hot. After use,

allow to cool down irst before

touching.

The message

Please short rinse the milk system

.

Press

O

appears

– if cleaning has not been performed after use

– if the appliance has just switched off

automatically and it was not cleaned

beforehand.

If this message appears, start with Step 2

under “Short rinse for milk system”.

Clean the milk system immediately after use.

Short rinse for milk system:

1. In the menu for drink selection, select

Short rinse

and press

o

start/stop (10).

2. Place a cup under the milk frother (12)

and the end of the milk tube in the cup.

3. Press

o

start/stop (10). The appliance

now ills the cup automatically with water

and draws it in again through the milk

tube for rinsing. The rinse procedure

takes about 1 minute.

4. Empty the cup and clean the milk tube.

All the parts can also be put in the

dishwasher.

TCC78K751_Heft1.indb 52

15.11.2011 10:15:21

Advertising
This manual is related to the following products: