Bosch TES50159DE VeroCafe Kaffeevollautomat schwarz - Manual (Page 37)

37
TES501.. 08/2011
en
Problem Cause Remedy
Grinding unit does not grind
the beans.
Beans are not falling into
the grinding unit (beans too
oily).
Gently tap the bean con­
tainer (1). Change the type
of coffee if necessary.
When the bean container
(1) is empty, wipe it with a
dry cloth.
No hot water dispensed. The milk frother (6) is soiled. Clean the milk frother (6) ,
see “Maintenance and daily
cleaning”.
Too little or no milk froth. The milk frother (6) is soiled. Clean the milk frother (6),
see “Maintenance and daily
cleaning”.
Build­up of limescale in the
appliance.
Descale the appliance.
Milk unsuitable for frothing. Use milk with a fat content
of at least 1.5%.
The milk frother (6) is not
assembled correctly.
Wet the milk frother parts
and press together irmly.
Coffee dispensing slows to
a trickle or stops completely.
The grind setting is too ine
or the pre­ground coffee is
too ine.
Adjust the grinding unit to
a coarser setting or use
coarser pre­ground coffee.
Build­up of limescale in the
appliance.
Descale the appliance.
Coffee has no “crema”. Unsuitable type of coffee. Use a type of coffee with a
higher proportion of robusta
beans.
The beans are no longer
fresh.
Use fresh beans.
The grind setting is not suit­
able for the beans.
Adjust the grind setting to
ine.
Coffee is too “acidic”. The grind setting is too
coarse or the pre­ground
coffee is too coarse.
Adjust the grinding unit to a
iner setting or use iner pre­
ground coffee.
Unsuitable type of coffee. Use a darker roast.
If you are unable to solve the problem, please call the hotline.
Simple troubleshooting
TES501_1DE.indb 37 05.08.2011 15:34:52