Bosch TES50251DE VeroCafe Kaffeevollautomat silber User Manual

Page 36

Advertising
background image

32

Robert Bosch Hausgeräte GmbH

32

en

● Remove the float (8e) and clean with a

damp cloth.

K

Do not put the following items in the

dishwasher: drip tray panel (8a), float

(8e), drawer (4), brewing unit (5a).

J

The following items are dishwasher-

safe: drip tray for coffee outlet (8c),

coffee grounds container (8b), grate for

coffee outlet (8d), aroma cover (2) and

measuring spoon (18).

● Wipe out the inside of the appliance (tray

holders and drawer).

Important: Drip tray for coffee outlet (8c)

and coffee grounds container (8b) should

be emptied and cleaned daily to prevent

mould from developing.

N.B.: If the appliance is cold when switched

on with the power switch

O / I (9) or if it

switches off automatically after coffee has

been dispensed, it rinses automatically. In

other words the system cleans itself.

Important: If the appliance has not been

used for a prolonged period of time (e.g.

after a vacation), clean the entire appliance

thoroughly, including the milk system and

brewing unit.

Cleaning the milk system

If the milk system was not cleaned after

milk has been dispensed, after a certain

amount of time the message

Rinse milk

system!

will appear on the display.

Clean the milk system immediately after use!

To pre-clean the milk system automatically:

1. Select

f

by turning the rotary knob (14).

2. Place a receptacle under the milk

frother (6).

3. Press the

start button (10).

4. Pull the milk frother (6) to open it.

The appliance now automatically fills

the receptacle with water. The rinse

procedure stops automatically after

about 1 minute.

5. Push the milk frother (6) in to close it.

6. Let the milk frother (6) cool down.

7. Empty the receptacle and wipe dry the

outside of the milk frother (6).

In addition to this, clean the milk system

thoroughly at regular intervals (by hand or

in the dishwasher).

Dismantling the milk system for cleaning:

1. To remove, take hold of the metal sleeve

and pull it downwards and off.

2. Twist the steam nozzle (6d) anticlock-

wise and remove it.

1

2

6d

Advertising