Operation, Sola control features, Viewing the flame signal – Fulton Caliber (CAL) Condensing Hydronic Boiler User Manual
Page 43: Cycle and run hours monitoring, Boiler naming
Advertising
Questions? Please Contact Your Local Manufacturer’s Representative
SECTION 3
CAL-IOM-2014-0129
OPERATION
3-9
SOLA Control Features
Refer to the Table below for additional SOLA Control screen displays.
Viewing the Flame Signal
1. The
fl ame signal can be viewed
from the main/home screen or
in main screen details.
2. Tap
Details in main screen,
then scroll to right by pressing
the arrow until Flame Detection
is displayed.
3. Tap the escape arrow in top
right hand corner to return to
main operating screen.
Cycle and Run Hours
Monitoring
Burner cycles, burner run time, and
pump cycles may be viewed from the
Statistics Confi guration screen on the
Control.
Boiler Naming
Advertising