Warranty & parts – Fulton Caliber (CAL) Condensing Hydronic Boiler User Manual

Page 55

Advertising
background image

Questions? Please Contact Your Local Manufacturer’s Representative

SECTION 5

CAL-IOM-2014-0129

WARRANTY & PARTS

5-3

Standard Warranty for Fulton Caliber Hydronic Boilers

Warranty Valid for all Caliber Models

Ten (10) Year Thermal Shock Warranty

The Caliber pressure vessel is warranted against failure due to thermal shock for a period of Ten (10) years from the date of shipment from

the factory. This warranty does not cover damage due to corrosion, scaling, sooting and/or improper installation, operation and maintenance.

Five (5) Year Pressure Vessel/Heat Exchanger Warranty

The pressure vessel and heat exchanger are covered against failures resulting from fl ue gas corrosion and/or defective material or

workmanship for a period of fi ve (5) years from the date of shipment from the factory. Waterside corrosion or scaling is not covered. Fulton

Heating Solutions (Fulton) will repair, replace, exchange or credit at our option, FOB factory, the pressure vessel as defi ned above, provided

this equipment has been installed, operated and maintained in accordance with the Installation, Operation and Maintenance manual.

Parts

Fulton will repair or replace any part of the Caliber boiler found to be defective in workmanship or material within 18 months of shipment from

the factory or 12 months from startup (whichever comes fi rst). Fulton shall be notifi ed in writing as soon as any defect becomes apparent.

Defective parts must be returned to Fulton for evaluation and warranty consideration.

General

Fulton shall be notifi ed in writing as soon as any defect becomes apparent. This warranty does not include freight, handling or labor charges

of any kind.

These warranties are contingent upon the proper sizing, installation, operation and maintenance of the boiler and peripheral components

and equipment. Warranties valid only if installed, operated, and maintained as outlined in the Fulton Installation and Operation Manual.

No Sales Manager or other representative of Fulton other than the Quality Manager or an offi cer of the company has warranty authority.

Fulton will not pay any charges unless they were pre-approved, in writing, by the Fulton Quality Manager.

This warranty is exclusive and in lieu of all other warranties, expressed or implied, including but not limited to the implied warranties of

merchantability and fi tness for a particular purpose. Fulton shall in no event be liable for any consequential or incidental damages arising in

any way, including but not limited to any loss of profi ts or business, even if the Fulton Companies has been advised of the possibility of such

damages. Fulton’s liability shall never exceed the amount paid for the original equipment found to be defective.

Excessive cycling will reduce the life of ANY boiler. Verify that your system is properly designed and check cycling rate according to

maintenance procedures listed in this manual.

To activate the warranty for this product, the appropriate commissioning sheets must be completed and returned to the Fulton Quality

Assurance department for review and approval.

05/01/2012

Advertising