Victory HIA-1D-S7-XH - Manual (Page 20)

D. Dial Thermometer Calibration:
1. Check cabinet temperature by using an accurate hand held dial or digital thermometer.
2. Look at the dial thermometer on the cabinet grille, if it matches the thermometer test meter (+ or -1 ° F)do not
adjust.
3. It it does not match, remove the dial thermometer lens with a small screwdriver.
4. To adjust the temperature needle, insert a small screwdriver in the slotted screw on the needle.
5. Hold the wide end of the needle to keep it from moving, and turn the screw clockwise or counterclockwise to
adjust as needed.
*Note: Temperature settings should be as follows; refrigerators set at 38 °° F, freezers set at 0 °° F, and warmers
set at 180
°°
F. Special request temperatures may vary. Example: 28
°°
F refrigerators, -10
°°
F freezer, etc.
6. Release needle and remove screwdriver.
7. Verify new needle setting with thermometer test meter.
8. Replace dial thermometer lens.
16
SECTION 3-OPERATION SECTION 3-OPERATION