Fairbanks FB3000 Inbound/Outbound Program Operators Manual - Manual (Page 29)

Section 4: Operation
09/07 29 51149 Rev. 1
MODES OF OPERATION
• The FB3000 In/Out Program can be set up to operate in one of the three
Modes of Operation, depending upon the service programming:
─ Gross Weighing
─ IN/OUT Weighing
─ GTN (Gross / Tare / Net) Weighing
ƒ Legal for Trade only when regulations permit it, depending on the specific State
Laws.
ƒ Must check with local Weights & Measures Officials .
NOTE: The Operating Mode is service-programmable only .
Gross Weighing
1. Press the ZERO key to zero the scale.
2. Drive the Vehicle onto the scale.
3. View the weight from the screen.
4. When the display is stable, press the Print key.
A Gross Weight Ticket prints.