Fairbanks FB3000 Inbound/Outbound Program Operators Manual - Manual (Page 7)

Section 1: General Information
09/07 7 51149 Rev. 1
IN/OUT PROGRAM DESCRIPTION
The FB3000 In/Out Program is
weighment program suited for specific
applications. It includes the following
additional features:
• Multicasting capability to monitor
and operate multiple scales across a
network.
• Backup and Restore feature.
• Programmable Serial
Communication Outputs
• Intalogix equipped units have load
cell diagnostics features for easier
diagnostic capabilities.
• An integrated e-mail client is
configurable to alert a service
organization or individual of a problem prior to total failure.
─ These error notifications include such warnings as load cell failure, low
memory, calibration change.
─ Flash memory error, and several other notifications to keep the proper
individuals informed of the scale’s operating condition.
─ Uses the customer’s existing email infrastructures.
• The FB3000 Kernel Program is the underlying software that delivers the
weighments.
• Some applications for this program include:
─ Grain elevator scales
─ Rail terminals
─ Coal, gas and other raw materials loading/unloading facilities
─ Ship yard facilities
• Requires a connection to the customer’s PC Network.
• The instrument can control up to eight (8) scales.
• Multi-scale viewing capability of up to four (4) scales at once is also a standard
feature.
• The FB3000 In/Out Program uses the following Modes of Operation:
─ In/Out Weighing
─ Gross Weighing
─ GTN (Gross/Tare/Net) Weighing
ƒ Legal for Trade only when regulations permit it, depending on the specific State
Laws.
ƒ MUST check with local Weights & Measurement Officials.
The FB 3000 IN/OUT Program is needed for specific
applications, such as freight weighment