Fairbanks FB3000 Inbound/Outbound Program Operators Manual - Manual (Page 34)

Section 4: Operation
09/07 34 51149 Rev. 1
Gross/Tare/Net Weighing, Continued
Mode Change
When a TARE or AUTO TARE is entered, the scale automatically switches from
the Gross Weighing Mode to the Gross-Tare-Net Mode.
• To change the scale from the Gross-Tare-Net Mode back to the Gross
Weighing Mode
, enter a Zero ( 0 ) Tare on the keypad.
Load Cell(s) Bad
If the display shows Load Cell(s) Bad , the weight on the platform has changed
from the calibration zero.
1. Check the platform for equipment, debris, or other materials, and then remove the
obstruction.
2. Press the ZERO button a second time to return to the Weigh Mode.
NOTE: Using the Gross/Tare/Net Weighing Mode is only Legal for Trade when
regulations permit it, depending on the specific State Laws.
• The user/owner
MUST check with local Weights & Measures Officials before
using the scale for this function.