Fairbanks FB3000 Inbound/Outbound Program Operators Manual - Manual (Page 31)

Section 4: Operation
09/07 31 51149 Rev. 1
IN/OUT Weighing, Continued
6. Remove the container from the
platform.
─ Material can be added or removed
from the container.
7. Move the container back onto the
platform.
8. Press the F3 (OUTBOUND) key on
the Weight Screen Keypad..
─ The display prompts the operator for
the LOOP ID that was entered for
this transaction on the Inbound
Weighment.
9. Enter the same LOOP ID through the
Weight Screen Keypad.
10. Press ENTER .
11. Press the PRINT Button.
─ The indicator retrieves the inbound
data from memory and combines it
with the new outbound data.
─ An INBOUND / OUTBOUND ticket is printed.
Data is stored as a completed transaction.
Whether full or empty, an Outbound Weighment Load is opposite from the Inbound Load .
The difference between the two is the Tare Weight . The vehicle driver then gets a Loop ID .