Fairbanks LabelBank/DataBank Application For the FB3000 Series Programmers Manuals - Manual (Page 12)

Section 1: General Information
6/08 12 51195 Rev. 1
MINIMUM SERVER REQUIREMENTS
The computer that runs the Barcode Printer Program is normally already preloaded
with the software. With only one station or user, there is plenty of storage space for
the different files generated by the DataBank Program.
There is, however, a second way to use this system. Two or more stations can
network together and access the same main database. In this case, because more
storage space is required to hold the generated data files, a separate server is
necessary. System requirements for networking
numerous stations are listed below.
• Windows 98 or higher
• Minimum 512Mb RAM Memory
• Minimum 1Ghz Processor
• Minimum 40G Hard Dive