Fairbanks LabelBank/DataBank Application For the FB3000 Series Programmers Manuals - Manual (Page 80)

Section 5: Operations
6/08 80 51195 Rev. 1
Activating the Hot Keys
Hot Keys allow the user to access
the Product window by pushing only
two digits, instead of inputting all five
numerals. This saves time, especially
when processing large, repetitive
orders.
• Press on the F6 button.
─ The words “Hot Keys” blinks
when the button is active, and
“Full ID” when it is not.
─ This button toggles on either
one or the other.
─ Hot Keys must be numeric,
and a message pops up
otherwise
.
Entering a Tare
• Press F4 to enter a manual tare.
─ The programmed tare stays active until
this, or a new product is selected.
Press F4 for a manual tare. It stays
active until this, or a new product is
selected.