Fairbanks LabelBank/DataBank Application For the FB3000 Series Programmers Manuals - Manual (Page 28)

Section 3: Configuring LabelBank
6/08 28 51195 Rev. 1
Options Menu/Time & Date
The following section defines each choice of the Options Menu .
STEPS
1. Left-click the Date drop-down arrow, and select the current day on the calendar.
2. Left-click the Date Format drop-down arrow, and select the preferred one.
3. Left-click the Dash/Slash drop-down arrow, and select the preferred one.
4. Left-click the Time arrows until the FB3000 System Clock is set correctly.
5. Left-click the Time Format drop-down arrow, and select the preferred format.
6. Left-click the am/pm or 24 hr drop-down arrow, and select the preferred setup.
─ When a keyboard is not available, the AM/PM value may be set by
highlighting that section of the Time field and pressing the
F1 button .
7. Left-click the Julian Time drop-down arrow, and select the preferred format.
─ Julian Time
counts the number of days that passed so far in the year.
NOTE: The block numbers on the drop-down images
( , , etc.) match the
step numbers of the procedure.
Field DESCRIPTION
Options Menu
•
Time and Date
Programs the Time and Date .
− Drop-down toggles the Standard and Julian Date (numbered date
of the year).