AT&T CL83301 - Manual (Page 27)

21
Telephone settings
Telephone base settings
�et date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information. You can turn
off the date and time settings of the caller ID service and set the date and
time manually (see
Use caller ID to automatically set date and time on
page 25).
After a power failure, the system prompts you to set the date and time.
To set the date and time manually:
1. When the telephone base is in idle mode, press
MENU/
�ELECT
to enter the
main menu.
2. Press q
CID
or p
DIR
to scroll to >�et date/time and
then press
MENU
/�ELECT.
3. Press q
CID
or p
DIR
to select the month, then press
MENU
/�ELECT, or enter the number using the
dialing keys.
4. Press q CID
or p DIR
to select the day, then press
MENU
/�ELECT, or enter the number using the
dialing keys.
5. Press q
CID
or p
DIR
to select the year, then press
MENU
/�ELECT, or enter the number using the dialing
keys, then press
MENU
/�ELECT to move on to set
the time.
6. Press q
CID
or p
DIR
to select the hour, then press
MENU
/�ELECT, or enter the number using the dialing keys.
7. Press q CID
or p DIR
to select the minute, then press
MENU
/�ELECT, or
enter the number using the dialing keys.
8. Press q
CID
or p
DIR
to highlight AM or �M, or press 2 for AM or
7 for �M. Then press
MENU
/�ELECT to confirm. There is a confirmation
tone and the screen returns to the previous menu.
NOTE: If the clock is not set when a message is recorded, the system announces, “Time
and day not set,” before it plays the message.
SET DATE
MM/DD/YY
p
q
SET TIME
HH:MM --
p
q
Ringers
>Set date/time
p
q