AT&T CL83301 - Manual (Page 45)

Multiple handset use
39
Intercom
Use the intercom feature for conversations between two handsets, or a
handset and the telephone base. You can buy additional expansion handsets
(model AT&T CL80111) for this telephone base to expand your telephone
system (up to 12 handsets).
Using a cordless handset:
1.
Press MENU/
�ELECT
in idle mode to enter the main menu.
Press q
CID
or p
DIR
to scroll to >Intercom, then press
MENU
/�ELECT.
If you have one handset, the handset shows
Calling BA�E 0.
If you have more than one handset, the handset shows
INTERCOM TO : Use the dialing keys to eenter a specific
device number ( 0 for the telephone base, 1-9 for
handsets 1-9, TONE and 0 for handset 10, TONE and
1 for handset 11 , TONE and 2 for handset 12, or
TONE and # for all devices), or press q
CID
or p
DIR
to
scroll to the desired device and press
MENU
/�ELECT .
Your handset screen shows Calling HAND�ET X,
Calling BA�E 0 or Calling all devices.
The destination device(s) rings and shows HAND�ET X is calling or
HAND�ET X is calling all ( HAND�ET represents the handset name, X
represents the handset number) .
2. To answer the intercom call, press �HONE/
FLA�H
, /��EA�ER ��EA�ER or any
dialing key ( 0-9, TONE , or #) on the called device. Both devices now
show Intercom.
3. To end the intercom call, one party presses OFF/
CANCEL , or place the
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display The other party hears four beeps. Both devices display
Intercom ended.
•
•
Calling
BASE
HANDSET X
is calling
Intercom
12/02 11:35 AM