Answering system settings, Or p, Elect . 3. press q – AT&T CL83301 User Manual

Page 79: Elect . 4. press q, Elect . 5. press q

Advertising
background image

Answering system

73

Answering system settings

Message alert tone
When the message alert tone is set to

On, and there is at least one new

message, the telephone base beeps every 10 seconds.

Unless you change it,

the message alert tone is set to off.

There is no audible alert at the handset.

To change the setting:
Using a cordless handset:
1. When the handset is in idle mode, press

MENU/

�ELECT

to enter

the main menu.

2. Press q

CID

or p

DIR

to scroll to

>Answering sys, then

press

MENU

/�ELECT.

3. Press q

CID

or p

DIR

to scroll to

>Ans sys setup, then

press

MENU

/�ELECT.

4. Press q

CID

or p

DIR

to scroll to

>Msg alert tone, then

press

MENU

/�ELECT.

5. Press q

CID

or p

DIR

to choose

>On or >Off.

6. Press

MENU

/�ELECT to save the setting. You hear a confirmation tone.

Using the telephone base:
1. When the telephone base is in idle mode, press

MENU/

�ELECT

to enter the main menu.

2. Press q

CID

or p

DIR

to scroll to

>Answering sys, then

press

MENU

/�ELECT.

3. Press q

CID

or p

DIR

to scroll to

>Ans sys setup, then

press

MENU

/�ELECT.

4. Press q

CID

or p

DIR

to scroll to

>Msg alert tone, then

press

MENU

/�ELECT.

5. Press q

CID

or p

DIR

to choose

>On or >Off.

6. Press

MENU

/�ELECT to save the setting. You hear a confirmation tone.

NOTES:

The message alert tone beeps only if all the conditions below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
To temporarily turn off the message alert tone, see page 77.

MSG ALERT TONE
>On

p

q

Remote code

>

Msg alert tone

p

q

MSG ALERT TONE
>On

p

q

Remote code

>

Msg alert tone

p

q

Advertising