AT&T CL83301 - Manual (Page 75)

Answering system
69
Answering system settings
Answer on/off
Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so, the
answering system does not answer calls and record incoming messages.
To turn the answering system on or off:
Using a cordless handset:
1. When the handset is in idle mode, press
MENU/
�ELECT
to
enter the main menu.
2. Press q
CID
or p
DIR
to scroll to >Answering sys, then
press
MENU
/�ELECT.
3. Press q
CID
or p
DIR
to scroll to >Answer ON/OFF, then
press
MENU
/�ELECT.
4. Press q
CID
or p
DIR
to highlight >On or >Off, then
press
MENU
/�ELECT to save the setting. You hear a
confirmation tone.
When the answering system is on, the handset shows
AN� ON.
Using the telephone base:
Press /AN�WER ON to turn the answering system on
or off. If the answering system is turned on, it announces,
“Calls will be answered.” If the answering system is
turned off, it announces, “Calls will not be answered.”
-OR-
1. When the telephone base is in idle mode, press
MENU/
�ELECT
to enter the main menu.
2. Press q
CID
or p
DIR
to scroll to >Answering sys, then
press
MENU
/�ELECT.
3. Press q
CID
or p
DIR
to scroll to >Answer ON/OFF, then press
MENU
/�ELECT.
4. Press q
CID
or p
DIR
to highlight >On or >Off, then press
MENU
/�ELECT to save the setting. You hear a confirmation tone.
NOTE: If the answering system is off and there is an incoming call, the system answers
after 10 rings and announces, “Please enter your remote access code.” For more
information about remote access, see page 84.
•
Play messages
>Answering sys
p
q
Record memo
>Answer ON/OFF
p
q
ANSWER ON/OFF
>On
p
q