Ransburg Discrete IO Module A11435 - Manual (Page 10)

SPECIFICATIONS
Environmental/Physical
Operating Temperature: 0°C to 55°C
Storage Temperature: -40°C to 85°C
Humidity: 0 to 95% non-
condensing
Size: 100 X 160 mm
Eurocard Module,
1 inch wide
Electrical
Electrical Power
Required: 24 VDC @ 0.11 A or
28 VDC @ 0.10 A
I nput current does not include that required by
analog and digital outputs. 24 VDC and 28 VDC
must be regulated and have over-current (40%) and
over-voltage (20%) protection.
Electrical I/O:
(Connection points listed in Tables 1, 2, 3, and 4)
Analog In: (0-10 VDC or 4-20 mA)
kV Set
Current Set (Over-Current
Setpoint)
Atomizer Speed Set
Di/dt Set
Analog Out: (0-10 VDC or 4-20 mA)
Output kV
Output Current
Atomizer Speed
Atomizer Drive Pressure
Electrical (Cont.)
Digital In: (24 VDC Source or Sink)
HV On
HV Off
Fluid Trigger
Air Trigger
Di/dt Disable
Bell Spin Enable
Digital Out: (Dry Contact)
Bell Running
HV Ready
HV On
Over-Current Fault
Feedback Fault
Analog Input In Local
Overspeed Fault
Underspeed Fault
Loss of Feedback
Invalid Speed Command
Low Bearing Air Fault
Speed Out of Tolerance
Discrete I/O Module - Safety
7 LN-9253-06.1
Ransburg