Securitron M680 - Manual (Page 14)

PN# 500-10550
Page 14 Rev. C, 08/12
Final Wiring
1.
Pull wires/cables through the wire feed-through hole(s) that are drilled in the frame. A small
screwdriver has been included to help make connections to the terminal blocks as required.
The end user and installer are liable for Fire and Building code compliance.
2.
The following diagrams show basic wiring configurations for the Magnalock.
M670
M680BD
*VERIFY JP1 JUMPER
POSITION FOR NO/NC
OPERATION
*VERIFY JP1 JUMPER
POSITION FOR NO/NC
OPERATION