Securitron M680 - Manual (Page 2)

PN# 500-10550
Page 2 Rev. C, 08/12
Recommended Tools
M670 / M680BD Specifications
Mechanical Electrical Environmental (Recommended)
Physical Size:
Height: 2-1/2” [66mm]
Depth: 2-1/2” [66mm]
Length: 11-1/2” [292mm]
Shipped Weight:
Weight: 13 lbs
Holding Force (Maximum)
1,100 Lbs. [500kg]
Input Voltage
12/24 VDC
Current
M670
12VDC/575mA (±10%)
24VDC/275mA (±10%)
M680BD
12VDC/550mA (±10%)
24VDC/300mA (±10%)
Tamper Switch Rating
Voltage – 30VDC (Maximum)
Current – 1 Amp
DPS Rating (M680 only)
Voltage – 30VDC
(Maximum) Current – 125mA
Operating Temperature
32ºF to 110ºF [0ºC to 43ºC]
Humidity
10% to 90% RH
Magnalock Preparation and Installation
Pre-Installation Survey
Before installing the Magnalock, the mounting location should be determined and assessed for the
following:
 Physical strength of the frame should be strong enough to meet or exceed the holding force of
the Magnalock
 Frame and vicinity should offer protection for the wiring to prevent vandalism
 Door should be inspected for any obstacles that may interfere when mounting the strike plate
 The Magnalock M670/M680 comes with factory default mounting for use with an outswing door.
Please contact Securitron for available brackets for other installation configurations.
Masking Tape #0, #1 and #2 Phillips Screwdrivers Hammer
Measuring Device 1/2” Open End or Crescent Wrench Pencil/Pen
Center Punch Wire Strippers/Cutter Multimeter
Fish Tape or Lead Wire 3/16” Hex (Allen) Wrench
Drill bits: 3/16”, 7/32” (wood frames only), 3/8”, 1/2”