Magnalock, Preparation 1 – Securitron M680 User Manual
Page 3
Advertising
![background image](/manuals/349139/3/background.png)
PN# 500-10550
Page 3
Rev. C, 08/12
Magnalock
Preparation
1.
Using a Phillips screwdriver, remove the two (2) screws securing the cover as shown.
Remove the cover to provide access to the circuit board on the back of the magnet.
The screws should be saved to re-attach the cover later.
2.
Component Locations
Quick Clip 1:
Configuration
SW2
Advertising
This manual is related to the following products: