Securitron SAM - Manual (Page 12)

PN# 500-10440
Page 12 Rev. F, 02/12
6.6 BondSTAT Sensor status wiring description
 The green and white wires supply electrical connection when the lock is ON and secure.
 The orange and white wires supply electrical connection when the lock is OFF or unsecure.
6.7 DPS – Door Position Sensor status wiring description
 The blue and yellow wires supply electrical connection when the door condition is closed.
 The brown and yellow wires supply electrical connection when the door condition is open.
6.8 Double Door Status Wiring - BondSTAT
When two Magnalocks are used for double door installation the BondSTAT contacts should be
wired in series for proper reporting. Connect the green wire of one lock to the white wire of the
other as shown below in Figure 21.
Figure 21
6.9 Double Door Status Wiring - DPS
When two Magnalocks are used for double door installation the DPS contacts should be wired in
series for proper reporting. Connect the blue wire of one lock to the yellow wire of the other as
shown below in Figure 22.
Figure 22
6.10 Emergency Release
Magnalocks are often wired into a system for quick release in case of emergency. Manual
switching or automatic triggering from a fire alarm system is practical. It is the user's
responsibility to correctly hookup the Magnalock according to the instructions. It is
recommended to use a switch or relay to perform break of power. Securitron power supplies
have terminals for the interconnection of such emergency release switches.
THE END USER AND INSTALLER ARE LIABLE FOR ALL FIRE AND BUILDING CODE
COMPLIANCE.
7 SPECIALIZED MOUNTING BRACKETS AND STRIKES
 SMLS – Surface Mount Lock Housing is a brushed stainless steel bracket/housing for
surface mounting the SAM Magnalock in installations where mortising the lock is not possible.
 SMSS – Surface Mount Strike Housing is a brushed stainless steel bracket/housing for
surface mounting the SAM strike assembly in installations where mortising the strike is not
possible.
 SWB – SAM Wood Bracket is a U-shaped (wrap style) reinforcement bracket used when
mortising the SAM strike assembly into the edge of a 1-3/4” thick wooden door. The bracket
is available in three different architectural finishes (US3, US10B and US26D).
 SAMN - Narrow Strike – The SAMN is a standard SAM Magnalock with a narrow strike
assembly provided for installations where the standard width strike will not fit. (The narrow
strike is not available in the “B” or “D” versions of the SAM series Magnalock).