B. collector dimensions and weights, C. tools and materials – HTP FP-40SC User Manual
Page 12
12
B. COLLECTOR DIMENSIONS AND WEIGHTS
Figure 1: Collector dimensions. Copper union in illustration is field-supplied. Allow spacing to assemble
fittings and unions.
FP-26SC
FP-32SC
FP-40SC
DIMENSION A
3.30”
3.30”
3.30”
DIMENSION B
47.2”
47.2”
47.2”
DIMENSION C
77.2”
97.2”
121.2”
DIMENSION D
50”
50”
50”
WEIGHT (LBS)
90
113
153
GROSS FRONTAL AREA (FT
2
)
25.6
31.8
39.7
TRANSPARENT FRONTAL AREA (FT
2
)
23.6
29.9
37.4
ABSORBER PLATE AREA (FT
2
)
23.2
25.7
36.9
FLUID CAPACITY (gallons)
.90
1.05
1.22
NOMINAL FLOW RATE (GAL/MIN)
0.8-1.5 gallons per
collector
0.8-1.5 gallons per
collector
0.8-1.5 gallons per
collector
Table 2
C. TOOLS AND MATERIALS
Make sure you have all necessary tools, materials and accessories before beginning work on the solar
system. Following is a list of minimum tools required; other plumbing components will be field supplied
according to the installation needs.
Electric Drill
Torch and Striker
Drill Index (w/ ½” and ¾” Wood Bits)
Putty Knife