IAI America PCON-CFA - Manual (Page 162)

4. SCON-CA
156
[2] Position/simple direct mode: In this mode, the actuator is operated by specifying position numbers.
You can select whether to specify the target position directly as a value, or
use a value registered in the position data table, by switching a control
signal.
For the speed, acceleration/deceleration, positioning band, etc., values
preregistered in the position data table are used. Up to 768 position data
points can be set.
Number of occupied bytes: 8 bytes
,
5
<; 7 7;:

99

; 7 7;:
';

+('
=<<;
7:5

" 6
 ,*

2 = ;

+< 3 ! 2 8
 7;:
= 6
22 8
 7;:

[3] Half direct mode: In this mode, the actuator is operated by specifying the speed,
acceleration/deceleration and push current, in addition to the target position, directly
as values.
Number of occupied bytes: 16 bytes
+('
=<<;
7:5

" 6
 ,*

2 = ;
,
5
<; 7 7;:

99
; 7 7;:7:5
1:3

99
+< 3
< 27472 7;:



99 2

22 8
 7;:3 2 8
 7;:


$

= 6
2=
: