IAI America PCON-CY - Manual (Page 87)

77
5. Operation Using I/O Signals
(Reference) Timing Charts and Example of Ladder Sequence Circuit
Rear end move command
for carry-out side
Zone II
Intermediate point move
command for carry-in side
Front end move command
for carry-in side
Horizontal movement of
carry-in side
Stopped/standing by
Flat speed
Intermediate
point
Intermediate
point
Front end Front end
Machine M is processing. The Zone II signal turns ON while
moving to the intermediate point.
Chuck
closed Top end R2
Automatic
operation
Intermediate point
move command for
carry-in side
Automatic
operation
Intermediate point
move command for
carry-in side Processing Zone II
Rear end move
command for
carry-in side