LevelOne FCS-1091 - Manual (Page 20)

16
Viewing Live Video
After installing the ActiveX component, you be able to view the live video stream in its
own window, as shown below.
Adjust focus manually by turning the front lens until the video becomes clear.
Figure 6: View Video Screen
There are a number of options available on this screen, accessed by select list, button
or icon. See the table below for details.
General Options
These options are always available, regardless of the type of camera you are
connected to.
ON. Click this to set the output I/O port to ON mode.
OFF. Click this to set the output I/O port to OFF mode.
Resolution. Select the desired video resolution format.
Zoom. A digital zoom feature is available. To zoom in on a section of
the window, click this icon. Then use your mouse to select the
section you want to magnify. Click the icon again to disable the zoom
feature.
Snapshot. Click this to take a single JPEG "snapshot" image of the
current video.
Flip. Click this to have the image swapped top-to-bottom.