LevelOne FCS-1091 - Manual (Page 28)

24
FCS-1091/WCS-1090 Setup
The FCS-1091/WCS-1090 configuration does NOT have be changed, unless:
• You wish to change the port number from the default value (1024).
• You wish to use the DDNS (Dynamic DNS) feature of the FCS-1091/WCS-1090.
HTTP Port Configuration
Normally, HTTP (Web) connections use port 80. Since the FCS-1091/WCS-1090 uses
HTTP, but port 80 is likely to be used by a Web Server, you can use a different port for
the FCS-1091/WCS-1090. This port is called the Secondary Port.
The default Secondary Port is 1024. If you prefer to use a different port number, you
can specify the port number on the FCS-1091/WCS-1090's Network screen, as
shown below.
Figure 10: Network Screen
See Chapter 5 - Web-based Management for further details on using the Network
screen.
Viewers need to know this port number in order to connect
and view live Video, so you must inform viewers of the
correct port number.