LevelOne FCS-1091 User Manual
Page 39
35
Use the following
DNS server
address
Primary DNS server - Use the same value as PCs on your
LAN. Normally, your ISP will provide this address.
Secondary DNS server - This is optional. If entered, this
DNS will be used if the Primary DNS does not respond.
Secondary Port
• HTTP Secondary Port - If enabled, you can connect
using either port 80 or the Secondary port. You must
enter the Secondary port number (between 1024 to
65535) in the field provided.
• HTTPS Secondary Port - If enabled, you can connect
using either port 80 or the Secondary port. You must
enter the Secondary port number (between 1024 to
65535) in the field provided.
Note that when using a port number which is not 80,
you must specify the port number in the URL. For example, if
the Camera's IP address was 192.168.1.100 and the
Secondary port was 1024, you would specify the URL for the
Camera as follows:
http://192.168.1.100:1024
RTP/RTSP
The RTSP (Real Time Streaming Protocol), a standard for
connected client(s) to control streaming data (MPEG-4) over
the World Wide Web. Enter the RTSP Port number (between
1024 and 65535) in the field provided. The default RTSP Port
is 554.
The RTP (Real Time Transport Protocol), an Internet protocol
for transmitting real-time data such as audio and video.
Max RTP Data Packet field will let users limit the size of the
sending packet. Enter the desired value between 400 and
1400.
Video Address
Enter the address of video.
Video Port
Enter the desired value (between 1024 to 65534) in the field
provided. The number you entered must be even values.
Audio Address
Enter the address of the audio.
Audio Port
Enter the desired value (between 1024 to 65534) in the field
provided. The number you entered must be even values.
Time to Live
Enter the desired length of time, if the packets fail to be
delivered to their destination within. The Time to Live you
entered must be in-between 1 to 255.
UPnP
Enable Discovery
If enabled, the FCS-1091/WCS-1090 will broadcast its
availability through UPnP. UPnP compatible systems such as
Windows XP will then be able to detect the presence of the
FCS-1091/WCS-1090.
Enable Traversal
If enabled, HTTP connections (from your Web Browser or the
Viewer and Recorder utility) can use secondary port instead
of port 80 (the standard HTTP port) to access the camera.