LevelOne FCS-1091 - Manual (Page 38)

34
Network Screen
This screen is displayed when the Network option is clicked.
Figure 15: Network Screen
Data - Network Screen
Network
Obtain an
Address
Automatically If selected, the FCS-1091/WCS-1090 will obtain its IP
address and related information from a DHCP Server. Only
select this option if your LAN has a DHCP Server.
Use the following
IP Address If selected, you must assign the following data to the FCS-
1091/WCS-1090.
• IP Address - Enter an unused IP address from the
address range used on your LAN.
• Subnet Mask - Use the same value as PCs on your
LAN.
• Default Gateway - Use the same value as PCs on your
LAN.
Obtain DNS server
address
automatically If selected, the FCS-1091/WCS-1090 will use the DNS
address or addresses provided by the DHPC server.
This option is only available if the IP address setting is Obtain
an IP address Automatically.