LevelOne PLI-3410 - Manual (Page 10)

10
Device Overview
WLAN LED
Power LED
PLC LED
ETH LED
WPS Button
SYNC Button
Clip Socket
Ethernet Port
Power Plug
Reset Button
The Description of each labeled part is described in the table below.
WLAN LED Lit green when the wireless function is enabled.
Blinking when data is transmitted or received via WLAN.
Blinking quickly when WPS is proceeded.
Power LED Lit green when the device is power on.
Lit off when power is off.
PLC (Powerline
Link/Act) LED Lit green when the power line sync is established.
Blinking quickly when data is transmitted or received via power line.
Blinking after Sync button is pushed (see Sync Button descripted below).
ETH (Ethernet
Link/Act) LED Lit green when connected to an Ethernet device.
Blinking when data is transmitted or received via Ethernet port.
WPS Button Push this button to trigger Wi-Fi Protected Setup function.
Sync Button Used to establish a LAN network with other power line devices.
Push this button for 1~3 second(s) and release it to set device enter the
power line Sync state.