LevelOne PLI-3410 - Manual (Page 67)

67
Settings Management
These functions allow you to save a backup of the current configuration of your device to a defined
location on your PC, to restore a previously saved configuration, or to restart your device with the
factory default settings. This is useful if you wish to experiment with different settings, knowing
that you have a backup in hand in case any mistakes occur. Besides, you can restart the device
to factory default setting after you have accidentally changed your settings that may result in
undesirable outcome.
Export Settings
Export Button: Click on Export to select where on your local PC you want to store your setting file.
You may also change the name of the file if you wish to keep multiple backups.
Note: It is advisable that you backup your device configuration before making any changes
to your device configuration.
Import Settings
Settings file location: Click on Browse to select a file from your PC to restore. You should only
restore your device setting that has been generated by the Backup function which is created with
the current version of the device firmware. Settings files saved to your PC should not be manually
edited in any way.
Select the settings files you wish to use, and press Import to load the setting into the device.
Load Factory Defaults
Load Default Button: Click on Load Default to initiate the restart process. After restarting, please
wait several minutes to let the selected setting applied to the system.
You may also reset your device to factory settings by holding the small Reset pinhole button more
than 2 seconds.