LevelOne PLI-3410 - Manual (Page 52)

52
Bridge Mode
WDS Mode: Select Bridge Mode from the drop-down menu. In this case, AP adapter acts as a
wireless bridge and will not respond to wireless requests.
Phy Mode: Select the appropriate mode from the drop-down menu. There are 4 options: CCK,
OFDM, HTMIX and GREENFIELD.
Encrypt Type: You can select None or other types: WEP, TKIP or AES. When WEP, TKIP or AES
is sleeted, the Encrypt Key field will display to allow you to set an encryption key.
AP MAC Address: Enter the associated AP ’s MAC Address(es) in this field and the following
fields. It is important that your peer
’s AP must include your MAC address in order to acknowledge
and communicate with each other.
Repeater Mode
WDS Mode: Select Repeater Mode from the drop-down menu. In this case, AP adapter acts as a
repeater and interconnects between access points.
Phy Mode: Select the appropriate mode from the drop-down menu. There are 4 options: CCK,
OFDM, HTMIX and GREENFIELD.
Encrypt Type: You can select None or other types: WEP, TKIP or AES. When WEP, TKIP or AES
is selected, the Encrypt Key field will display to allow you to set an encryption key.
AP MAC Address: Enter the associated AP ’s MAC Address(es) in this field and the following
fields. It is important that your peer
’s AP must include your MAC address in order to acknowledge
and communicate with each other.